Section 5 - Measurement Modes
Page 23
During the height routine:
•
Press
to re-shoot the previous point.
•
Press
to exit the height routine.
•
The laser is not active while measuring the ANG1 and ANG2 values. As
long as you hold
, the inclination reading is displayed and updated as
your aiming point changes. The measured inclination is based upon your
aiming point when you release
.
•
When the height result is displayed, just press
to start the routine and
repeat the steps.
2D Missing Line Routine
The 2D Missing Line Routine calculates distances and angles to describe the relationship between
two points in two-dimensional space (connecting vector). This routine is ideal for remote slope
determinations and changes in elevation from one location.
The simple routine prompts you to take two shots to targets: "Shot 1” and “Shot 2”. The TruPulse
uses the results to calculate four variables between the two points: Slope Distance, Inclination,
Horizontal Distance, and Vertical Distance as shown in figure to the right.
•
HD: Horizontal Distance: Horizontal component of the missing line.
•
VD: Vertical Distance: Change in elevation between point #1 and point #2.
•
SD: Slope Distance: Length of the missing line.
•
INC: Inclination between point #1 and point #2.
Note: Only International lasers include meters.
Figure #19
= MEASURED
= CALCULATED
Summary of Contents for TruPulse 200
Page 1: ......
