Section 3 - Basic Operations
Page 13
Firmware Revision Numbers
The firmware revision numbers provide manufacturing information about your TruPulse. To display
the main and auxiliary firmware revision numbers:
1.
Start with the TruPulse powered OFF, press-and-hold
.
o
Do not release
until done. If you release the button too early, power OFF the
TruPulse and repeat step #1.
2.
Looking through the eyepiece:
o
Press
to display the
main firmware revision
number. The display should
look similar to the example
below. The leftmost character
will always be ‘
A
’ and the
remaining 3 digits represent
the main firmware revision
number (
1.02
in Figure #9).
o
Press
to display the auxiliary firmware revision number. The display should look
similar to the example above. The leftmost character will always be ‘
b
’ and the remaining
3 digits represent the auxiliary firmware revision number (
1.08
in Figure #9).
Neck Strap
To attach the neck strap:
Figure #9
Figure #10
Summary of Contents for TruPulse 200
Page 1: ......
