PLMNL0252 REV. B Effective Date: 10/16/17
2
FiberCUT
®
HR Operation Manual
The FiberCUT
®
HR has 25 mm of
programmable, automatic nozzle assembly Z-
axis travel. See
The fully retracted position locates the
nozzle 12.5 mm above the fixed focus point.
The center of travel position locates the
nozzle at the fixed focus point.
The fully extended position locates the
nozzle 12.5 mm below the fixed focus point.
Figure 2
The fixed focus point does not
move relative to the FiberCUT
®
HR mounting plate.
The moving nozzle assembly
moves relative to the fixed
focus point.