Laser Mech FiberCUT HR, Operation Manual, Page: 9 / 62

PLMNL0252 REV. B Effective Date: 10/16/17
3
FiberCUT
®
HR Operation Manual
2 Mechanical Installation and
Operation
2.1 Machine Mount
The mount plate attaches directly to your 3-
axis machine according to
Figure 3 .
Figure 3
2.2 Plumbing
– Water Cooling /
Assist Gas / Purge Gas / Nozzle
Cooling / Air Blast
See Figure 4 and Figure 5 for line
locations.

See Appendix B for laser head cooling
specifications.

See the manufacturer’s information for
specifications on cooling the fiber.

See Appendix C for assist gas
specifications.

See Appendix D for purge gas
specifications.

See Appendix E for nozzle cooling and
air blast specifications.
Laser Mechanisms offers a hose
management kit (PLKIT0318). It
includes all necessary hoses, fittings
and a manifold block used to route and
manage stress on the (5) hoses near
the lower cover glass door.
See
Figure 5 .
Hoses for use at the lens manifold block
must be braided stainless steel, as
provided in PLKIT0318, or equivalent.
Figure 4