background image

b.

In the message bar at the bottom of the screen, click 

Run

. Follow the on-screen instructions to install

WebComponents

. When the following screen opens, click 

Finish

.

The Live View screen with the camera video image should appear. 

For more information about the IE browser interface to your camera, go to LarsonElectronics.com for the latest 

IP Camera 

User Manual 

for your camera.

NOTE

:

 

Most IP cameras have a 

Reset

 

button for returning the camera configuration to its factory settings. 

The reset 

button needs to be pressed with the camera disconnected from power.  Continue holding the reset button down and plug 

the camera back into power and continue to hold the reset button for an additional 30 - 45 seconds.

NOTE: 

For more details on using the functions of this camera, refer to the instruction manual for the Camera Management 

Software (CMS) you are using.

THESE  INSTRUCTIONS  MAY  NOT  COVER  ALL  DETAILS  OR  VARIATIONS  OF  THIS  PRODUCT  FOR  YOUR  EQUIPMENT  OR  INSTALLATION  REQUIREMENTS.  SHOULD  FURTHER 
INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL A

[email protected]

 OR BY PHONE 

AT 1-

 FOR FURTHER ASSISTANCE. 

PLEASE VISIT LARSONELECTRONICS.COM FOR 

WARRANTY

 AND 

RETURN

 INFORMATION.

877-348-9680

Larson Electronics, LLC

 

Phone: (877) 348-9680

 Fax: (903) 498-3364 

 www.larsonelectronics.com 

10

 

of 

10

 

IP Camera Network Setup Guide

 

Summary of Contents for EXPCMR-IP-POE Series











Reviews: