background image

WArninG

Static conDuctiVe HoSe

Static conductive hose is composed of a proprietary static conductive compound.  When used with the 

proper static conductive cuffs, accessories, and properly connected to a properly grounded vacuum system, it will 

serve as a means to conduct or dissipate static electricity.  Verification of system integrity is the sole responsibility 

of the user.  Failure by the user to verify system integrity could result in electrical shock, bodily injury, and destruc

-

tion or damaging of property.  Depending on the application, particularly the property of the materials transport

-

ed by the system, volume, bending, pressure, vacuum or prevailing conditions, the use of the hose may require 

frequent inspections.  We recommend that inspections of the interior and exterior of the hose be performed at 

frequent intervals by the user related to the applicable risk factors.  Hose or accessories indicating wear affecting 

the integrity of  the system should be replaced before risk factors increase.  We are not in a position to anticipate 

all of the conditions and factors involved in a particular application.  Suitability of this hose for use in a particular 

application is the sole responsibility of the user.  It is for this reason that the installer and end user of the system 

should conduct adequate testing of the hose for particular applications prior to assembly or installation.  We 

recommend to our purchaser that they advise end users of this warning. Failure to strictly follow this warning will 

void any and all press or implied warranties of fitness, merchantability, or functionality of the product.

conDUctiVe SerieS

Conductive hose is provided and will allow static charge buildup to pass to the recovery can and then to 

the ground wire.  only aluminum tools should be used, and are provided, to prevent sparking. The drum head 

is grounded to the drum.  A ground wire and clamp must be attached to a grounded source in order to dissipate 

static charges.

8

Summary of Contents for EPV-PN-2G-SS










Reviews: