The following diagram shows the electrical schematic for the rotary phase converter:
Firmly snap in the green, yellow/white and red switch
terminals into the pushbutton switch body. (In the image
at right, a clear enclosure cover is used for clarity.)
f. Wire the idler:
240V:
Bolt idler leads 4, 5 & 6 together. Insulate this connection with electrical tape
or heat shrink tubing. Connect the ground line to the ground screw inside
the motor conduit box. Inside the phase converter panel box, connect
terminal A to (1,7), terminal B to (2,8) and terminal C to (3,9). Insulate these
connections separately. Hardware for these connections is provided.