Larson Davis PRM2103 Reference Manual Download Page 12

Page: 12 / 91

PRM2103 Reference Manual

EPS Installation

2-4

2.4 EPS Installation

The CBL203, CBL208, and CBL222 provide 10-pin connections between
the PRM2103 and their connecting devices. To connect the PRM2103 and
cable, follow these steps:

Step 1

Assemble the microphone on top of the PRM2103
preamplifier. If needed, install an o-ring on the bottom
thread of the preamplifier, see Figure 2-5.

FIGURE 2-5

Microphone Install

Step 2

Thread the cable up through the EPS with the cable out the
top, so it rotates freely.

Step 3

Align the red dots on the PRM2103 and cable, then connect
by pushing gently together. The whole assembly should be
out and above the EPS.

Step 4

Push the preamplifier into the EPS until the microphone is
seated on top.

FIGURE 2-6

EPS Installation

O-ring location

Microphone will
be visible on top

Summary of Contents for PRM2103




























































































Search results

Summary of Contents for PRM2103

Reviews:

Related manuals for PRM2103

Brands by name

Popular brands

Larson Davis PRM2103, Reference Manual

Search results

Summary of Contents for PRM2103

Reviews:

Related manuals for PRM2103

Brands by name

Popular brands