Larson Davis PRM2103 Reference Manual Download Page 90 | Manualshive

Page: 90 / 91

background image

PRM2103 Reference Manual

Upgrading Firmware with SLM Utility-G3

B-15

B.5 Upgrading Firmware with SLM Utility-G3

LEARN MORE

Although this

procedure describes the steps
for upgrading firmware in SLM
Utility-G3, you can also
upgrade firmware in G4
Software. Refer to the G4
Software Manual for more
information.

The PRM2103-FF firmware is distributed with the Model 831 firmware. The
PRM2103-FF is upgraded automatically when connected to the Model
831. Firmware is not upgraded if the Model 831 is making a measurement.

To upgrade the Model 831 sound level meter and PRM2103-FF firmware,
follow these steps:

Step 1

Download and install the SLM Utility-G3 software.

TAKE NOTE

Keep the PRM2103-

FF and Model 831 connected
and properly powered until
after firmware upgrades are
complete.

Step 2

Upgrade the Model 831 firmware. If not already connected,
connect the Model 831 to the PRM2103-FF with CBL203 or
CBL205. See FIGURE 2-2 or FIGURE 2-5 for examples of these
connections.

Step 3

On the Model 831, navigate to the Preamp page on the Live
tab. The Preamp page displays a “programming” message
when the firmware is updating, as shown in .

PRM2103-FF Firmware Upgrade

TAKE NOTE

Firmware in the

PRM2103-FF is upgraded only
when the version stored in the
Model 831 is newer than the
version in the preamplifier.

The Preamp page displays the new firmware version number after
programming is complete, as shown in the top highlighted area in Figure
B-20.

If the upgrade does not complete properly after multiple programming
attempts, the Preamp Page displays the message “Fault 101.”

«
...
88
89
90
91
»

Summary of Contents for PRM2103




























































































Reviews:

No comments

Related manuals for PRM2103

Brand: dB Technologies Pages: 133

Brand: OM POWER Pages: 56

Brand: Cary Audio Design Pages: 20

Brand: Stageline Pages: 18

Brand: Symetrix Pages: 11

Brand: Advance Paris Pages: 16

Brand: Randall Pages: 10

Brand: Denon Pages: 34

Brand: Avatar Pages: 16

Brand: Shure Pages: 3

L2X Stereo Line

Brand: Mapletree Pages: 6

Power Drive DNA-2

Brand: McCormack Pages: 4

Brand: ELECTROCOMPANIET Pages: 16

Brand: Line Magnetic Pages: 13

Brand: McIntosh Pages: 4

ATLONA AT-UHD-CAT-2

Brand: Panduit Pages: 18

BO-CD-100-4 -EV

Brand: G+M Elektronik Pages: 3

Brand: Classe Audio Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands