8
The Traveller™ Charge & Sync Range - User Manual
Copyright LapSafe® Products
Figure 9
Connecting USB leads
LapSafe® Travellers™ with foam storage compartments
With the foam plug removed from the central slot locate the small individual
split-holes designed to hold each lead (
Figure 10
).
Measure the required amount of the charge/sync lead to remain above the
surface of the foam. Push 50mm (2”) of the remaining lead into the appropriate
split-hole. Repeat for each lead (
Figure 11
).
Avoid tangles by fitting each individual lead separately, in the manner described.
When all 16 leads are in position the foam plug can be replaced to cover the
charge/sync leads.
Figure 10
Routing leads to device slots
Figure 11
Feeding cables through
