4
The Traveller™ Charge & Sync Range - User Manual
Copyright LapSafe® Products
1. Introduction
Thank you for purchasing a LapSafe® Traveller™. We have made every effort to
ensure it will provide you with many years of satisfactory use.
The LapSafe® Traveller™ will support most USB charging tablets and it has been
supplied with a two metre long mains lead fitted with a 5amp fuse. USB charging
is low voltage (5 volts) and therefore intrinsically safe and each USB connection is
individually protected with a resetting fuse.
Your LapSafe® Traveller™ has been designed to be simple to use and it is ready to
receive your devices.
All our products are manufactured to a high standard and we constantly monitor
for any issues. Should you encounter any difficulties with any element of using
your LapSafe® Traveller™ we would like to know about it, so please call us on
0800 130 3456
or visit
lapsafe.com
2. Important actions
Upon delivery of your new Traveller™ you must:
•
Take a note and store in a safe place your Traveller™’s serial number which
can be found inside your case. The silver plate will hold your serial number
that begins with TRV
(Figure 1)
. You will need to quote this number for all
enquiries relating to your Traveller™.
•
Visit
lapsafe.com/activate
to activate your Lifetime warranty. Your warranty
will not be valid unless you do this.
•
Read the section on ‘Health & Safety’
(Section 10)
