Status Light Behavior
Table 7-2. UBox Status Lights -- UBox is Running
Light
Color
Status
Green
Slowing Blinking
(on for 3 seconds then off/on):
UBox is working.
OFF
or
ON
(does not blink):
SYSTEM
1
If the light is off, the UBox is not receiving power. If the light is on, the UBox
has crashed and needs to be reset (see
Resetting the UBox Hardware
on
page 55).
Red
SYSTEM 2
=
OFF
and
SYSTEM 3
=
OFF
:
UBox is currently working as it detects users connecting to the UBox.
SYSTEM 2
=
ON
and
SYSTEM 3
=
OFF
:
UBox is configured to use a static IP and does not detect any users
connected to the UBox.
SYSTEM 2
=
ON
and
SYSTEM 3
=
ON
:
UBox has obtained an IP address using DHCP and does not detect any
users connected to the UBox.
SYSTEM 2=OFF
and
SYSTEM 3
=
ON
:
SYSTEM
2 - 3
UBox obtained an IP address using Zeroconfig and does not detect any
users connected to the UBox.
Green
ON
/
OFF
:
NETWORK 1
If the light is on, the UBox has detected a link speed of 100 Mbits. If the light
is off and
NETWORK 3
is on, the link speed is 10 Mbits.
Green
ON
/
OFF
:
If the light is on, the UBox’s Ethernet port is in full-duplex mode. If the light is
off and
NETWORK 3
is on, the Ethernet port is in half-duplex mode.
Blinking
:
NETWORK
2
Packet collision has occurred. This is a normal and self-recovering
occurrence with Ethernet.
Green
ON
or
Blinking
:
UBox has detected an Ethernet connection. This light blinks during data
transmission.
NETWORK
3
If the light is off, no Ethernet connection was detected.
ON (does not blink)
:
UBox is working. If a USB device is connected to the USB port, this light
indicates that the USB UBox supports your USB device.
Blinking
(only appears when a USB device is connected):
USB 1 - 4
UBox hardware does not support your USB device, you have connected
more than 8 USB devices (by using multiple
compound
USB devices), or
the UBox is having problems communicating with the device. Please check
the UBox's USB device compatibility on the Lantronix web site or contact
Lantronix Tech Support.
UBox User Guide
60