6: Basic Parameters
SLC™ 8000 Advanced Console Manager User Guide
80
Viewing IP Filters
You can view a list of filters and a table showing how each filter is mapped to an interface.
To view a list of IP filters:
1. Click the
Network
tab and select the
IP Filter
option. The following page displays:
Figure 6-4 Network > IP Filter
Mapping Rulesets
The administrator can assign an IP Filter Rule Set to a network interface (Ethernet interface), a
modem connected to a device port, or a USB modem or an internal modem (if installed).
To map a ruleset to a network interface:
1. Click the
Network
tab and select the
IP Filter
option. The
page displays.
2. Select the IP filter rule set to be mapped.
3. From the
Interface
drop-down list, select the desired network interface and click the
Map
Ruleset
button. The Interface and rule set display in the IP Filter Mappings table.
To delete a mapping:
1. Click the
Network
tab and select the
IP Filter
option. The
page displays.
2. Select the mapping from the list and click the
Delete Mappings
button. The mapping no
longer displays.
3. Click the
Apply
button.
Enabling IP Filters