Lantronix SLC 8000 Series User Manual Download Page 64

Page: 64 / 425

5: Web and Command Line Interfaces

SLC™ 8000 Advanced Console Manager User Guide

managers (RPMs) and/or SensorSoft temperature and humidity probes connected to the

device port.

The yellow orange

and

buttons display the status of the power supplies.



Entry Fields and Options:

Allow you to enter data and select options for the settings.

Note:

For specific instructions on completing the fields on the web pages, see Chapters

5 through 12.



Apply

Button

: Apply on each web page makes the changes immediately and saves them so

they will be there when the SLC 8000 advanced console manager is rebooted.



Icons

: The icon bar above the Main Menu has icons that display the following:

Home page.

Information about the SLC unit and Lantronix contact information.

Configuration site map.

Status of the SLC 8000 advanced console manager.



Help

Button

: Provides online Help for the specific web page.

Logging in

Only the system administrator or users with web access rights can log into the Web Manager.

More than one user at a time can log in, but the same user cannot login more than once.

To log in to the SLC Web Manager:

1. Open a web browser.
2. In the URL field, type

https://

followed by the IP address of your SLC 8000 advanced

console manager.

3. To configure the SLC unit, log in using

sysadmin

as the user name and the last 8 characters of

the Device ID (for newly manufactured units that come installed with 8.3.0.0 or later) or

PASS

(for

all older units) as the password

Note:

If the Device ID is not set, the default sysadmin password is the last 8

characters of the serial number.

Note:

The system administrator may have changed the password using one of the

Quick Setup methods in the previous chapter.

The Lantronix SLC

Quick Setup

page displays automatically the first time you log in.

Subsequently, the Lantronix SLC Home page displays. (If you want to display the

Quick Setup

page again, click

Quick Setup

on the main menu.)

Logging Out

To log off the SLC web interface:

1. Click the

Logout

button located on the upper left part of any Web Manager page. You are

brought back to the login screen when logout is complete.

Summary of Contents for SLC 8000 Series










































































































































































































































































































































































































































Search results

Summary of Contents for SLC 8000 Series

Reviews:

Brands by name

Popular brands

Lantronix SLC 8000 Series, User Manual

Search results

Summary of Contents for SLC 8000 Series

Reviews:

Brands by name

Popular brands