5: Network Settings
PremierWave® EN Embedded System on Module User Guide
45
Using the CLI
To enter the wlan0 Profile command level:
enable -> config -> wlan profiles -> edit
<profile number>
or
enable -> config -> wlan profiles -> edit
<profile name>
Using XML
Include in your file:
<configgroup name=”wlan profile” instance=”
profile name
”>
and
<configitem name=”basic”>
Table 5-16 WLAN Profile Advanced Settings
To Configure WLAN Profile Advanced Settings
Using Web Manager
To view or edit an existing WLAN Profile, click
WLAN Profiles
on the menu and select an
existing profile.
WLAN Profile Advanced Settings Description
TX Data Rate Maximum
Specify the rate for data transmission.
Note:
This setting only applies if ‘
TX Data
Rate
’ is set to ‘
Fixed
’.
TX Data Rate
Specify the type of transmission data rate:
Fixed
= keeps the transmission rate at the configured value.
Auto-reduction
= allows the PremierWave EN system on module
to reduce the data rate automatically, depending on link quality.
TX Power Maximum
Specify the maximum transmission output power in dBm.
Antenna Diversity
Select the antenna the radio will use or allow PremierWave EN unit to
automatically make the selection.
Enabled
= allows the PremierWave EN unit to select the antenna.
Antenna 1
= use the internal antenna.
Antenna 2
= use the external antenna.
Max Missed Beacons
Enter the maximum number of missed beacons allowed.
Power Management
Select to
Enable
or
Disable
power management, which reduces the
overall power consumption of the PremierWave ENsystem on
module, but can increase latency.
Enabled
= allows the PremierWave EN unit to turn off the receiver
when it is idling.
Disabled
= keeps the receiver on at all times.
Power Management Interval
Select number of beacons (100 msec interval) between 1 and 10.
The above-mentioned latency can be up to this number “X” 100
msec. This field becomes available when power management is
enabled.
