12: Maintenance and Diagnostics Settings
PremierWave® EN Embedded System on Module User Guide
118
To Specify Clock Setting Method
Using Web Manager
To view thread information, click
Clock
in the menu.
Using the CLI
To enter the command level:
enable -> config -> clock
Using the XML
Include in your file:
<configgroup name="clock">
System Settings
The PremierWave EN embedded system on module system settings allow for rebooting the
device, restoring factory defaults, uploading new firmware and updating a system’s short and long
name.
Note:
Anytime you reboot the unit, this operation will take some time to complete.
Please wait a minimum of 10-20 seconds after rebooting the unit before attempting to
make any subsequent connections.
Table 12-12 System Settings
Time (24 hour)
Use the drop-down menu to select the
Hour
,
Min
and
Sec
. This option becomes
available when the
Manual
method is selected.
NTP Server
Set NTP Server to an NTP server’s IP address or hostname. This option becomes
available when the
SNTP
method is selected.
Time Zone
Select the geographical time zone from the drop-down list.
System Settings
Description
State
Click to enable or disable the reboot schedule.
Current date and time
Displays the current date and time.
Schedule
Select the
Daily
or
Interval
schedule from the drop-down menu.
Time (24 hour)
Enter the
Hour
and
Min
(minute) in 24 hour time, for the reboot time if
Daily
schedule is selected.
Interval
Enter the interval number and select the interval type (
Hours, Days
, or
Weeks
) from the drop-down menu.
Reboot Device
Click the
Reboot
button to reboot the device.
Restore Factory Defaults
Click
Factory Defaults
to restore the device to the original factory settings. All
configuration will be lost. The PremierWave unit automatically reboots upon
setting back to the defaults.
