
5: Network Settings
PremierWave® EN Embedded System on Module User Guide
32
To Configure Network 1 Interface Settings
Using Web Manager
To modify Ethernet (eth0) settings, click
Network
on the menu and select
Network 1 ->
Interface -> Configuration
.
Using the CLI
To enter the eth0 command level:
enable -> config -> if 1
Using XML
Include in your file:
<configgroup name="interface" instance="eth0">
IPv6 State
Select to enable of disable the IPv6 state.
IPv6 DHCP Client
Select to turn
On
or
Off
. At boot up, after the physical link is up, the PremierWave
unit will attempt to obtain IPv6 settings from a DHCPv6 server and will
periodically renew these settings with the server.
IPv6 Address
Enter the static IPv6 address to use for the interface.
Note:
This setting is used if Static IPv6 is active (DHCPv6 is Disabled). Changing
this value requires a reboot. When DHCPv6 is enabled, the PremierWave EN tries
to obtain an IPv6 address from a DHCPv6 server.
IPv6 Default Gateway
Enter the default IPv6 Default Gateway.
IPv6 Domain
Enter the IPv6 domain name suffix for the interface.
Note:
This setting will be used when Static IP is active, or if IPv6 DHCP client is
active and no Domain Suffix was acquired from the server
.
IPv6 Primary DNS
Enter the IPv6 address of the primary Domain Name Server.
Note:
This setting will be used when Static IP is active, or if IPv6 DHCP client is
active and no Domain Suffix was acquired from the server
.
IPv6 Secondary DNS
Enter the IPv6 address of the secondary Domain Name Server.
Note:
This setting will be used when Static IP is active, or if IPv6 DHCP client is
active and no Domain Suffix was acquired from the server
.
Network Interface
Settings (continued)
Description