2: Introduction
PremierWave® EN Embedded System on Module User Guide
19
Configuration Methods
After installation, the PremierWave EN unit requires configuration. For the unit to operate correctly
on a network, it must have a unique IP address on the network. There are four basic methods for
logging into the PremierWave EN embedded system on module and assigning IP addresses and
other configurable settings:
Web Manager
: View and configure all settings easily through a web browser using the
Configuration Using Web Manager on page 24
.)
DeviceInstaller
: Configure the IP address and related settings and view current settings on
the PremierWave EN embedded system on module using a Graphical User Interface (GUI) on
a PC attached to a network. You will need the latest version of the Lantronix®
DeviceInstaller™ utility. (See
Accessing the PremierWave XC HSPA+ Device Using
.)
Command Mode:
There are a few methods for accessing Command Mode (CLI): making a
Telnet or SSH connection, or connecting a PC or other host running a terminal emulation
program to the unit’s serial port. (See the
PremierWave EN Embedded System on Module
Command Reference
for instructions and available commands.)
XML:
The PremierWave EN embedded system on module supports XML-based configuration
and setup records that make device configuration transparent to users and administrators.
XML is easily editable with a standard text or XML editor. (See the
PremierWave EN
Embedded System on Module Command Reference
for instructions and commands).
Addresses and Port Numbers
Hardware Address
The hardware address is also referred to as the Ethernet address, physical address, or MAC
address. The first three bytes of the Ethernet address are fixed and identify the unit as a Lantronix
product. The fourth, fifth, and sixth bytes are unique numbers assigned to each unit. Sample
hardware address:
00-80-A3-14-1B-18
00:80:A3:14:1B:18
IP Address
Every device connected to an IP network must have a unique IPv4
address. This address
references the specific unit.
Port Numbers
The following is a list of the default server port numbers running on the PremierWave EN
embedded system on module:
TCP Port 22: SSH Server (Command Mode configuration)
TCP Port 23: Telnet Server (Command Mode configuration)
