5: Network Settings
PremierWave® EN Embedded System on Module User Guide
53
WAN
Table 5-21 WAN Configuration
WAN MAC Address Filters
Accept or drop traffic from specified MAC addresses using the settings below.
Table 5-22 Adding a New MAC Address Filters
To Configure Gateway WAN Settings
Using Web Manager
To modify gateway WAN information, click
Gateway
on the menu and select
Configuration >
WAN
.
Gateway Settings
Description
Operating Mode
Select the type of operating mode:
Disabled
: prevents the device to be used as a gateway; use the device
normally.
Gateway
: allows the device to be used as a router with NAT.
Router
: allows the device to be used as a router without NAT.
Firewall
Select to enable or disable firewall:
Enabled
: enables the device firewall.
Disabled
: disable the device firewall.
MAC Address filter
Select to enable or disable the MAC address filter.
Interface
Specify the WAN interface. Generally wlan0 interface.
IP Address
Assign a static IP address to the gateway.
IPv6 Address
Assign a static IPv6 address to the gateway.
Primary DNS
Enter the IP address of the primary Domain Name Server.
Note:
This setting will be used when either Static IP or Auto IP is active, or
if DHCP/BOOTP is active and no DNS server was acquired from the
server.
Secondary DNS
Enter the IP address of the secondary Domain Name Server.
Note:
This setting will be used when either Static IP or Auto IP is active, or
if DHCP/BOOTP is active and no DNS server was acquired from the
server.
Adding or Deleting New MAC
Address Filter Settings
Description
Delete
Click the checkbox to the left of any existing mac address filter to be
deleted and click the
Submit
button.
MAC Address
Enter a new mac address to add a new filter.
Action
Select to
ACCEPT
or
DROP
above indicated MAC Address field.
Add
Click
Add
after adding new MAC address filter information.
