11: Maintenance and Diagnostics Settings
PremierWave EN User Guide
77
IP Sockets
You can view the list of listening and connected IP sockets.
To View the List of IP Sockets
Using Web Manager
To view IP Sockets, click
Diagnostics
in the menu and select
IP Sockets
.
Using the CLI
To enter the command level:
enable, show ip sockets
Using XML
Include in your file:
<statusgroup name=”ip sockets”>
Ping
The ping command can be used to test connectivity to a remote host.
Table 11-8 Ping Settings
To Ping a Remote Host
Using Web Manager
To ping a Remote Host, click
Diagnostics
in the menu and select
Ping
.
Using the CLI
To enter the command level:
enable
Using XML
Not applicable.
Traceroute
Here you can trace a packet from the PremierWave EN to an Internet host, showing how many
hops the packet requires to reach the host and how long each hop takes. If you visit a web site
whose pages appear slowly, you can use traceroute to determine where the longest delays are
occurring.
Diagnostics: Ping
Settings (continued)
Description
Host
Enter the IP address or host name for the PremierWave to ping.
Count
Enter the number of ping packets PremierWave should attempt to send to the
Host
.
The default is
5
.
Timeout
Enter the time, in seconds, for the PremierWave to wait for a response from the
host before timing out. The default is
5
seconds.
