manualshive.com logo in svg

Lantronix PremierWave EN, User Manual

Share
Download
Lantronix PremierWave EN User Manual Download Page 6

PremierWave EN User Guide

6

Protocol Stack Settings _____________________________________________________ 74

 

IP Settings ___________________________________________________________ 74

 

To Configure IP Network Stack Settings ____________________________________ 74

 

ICMP Settings _________________________________________________________ 75

 

To Configure ICMP Network Stack Settings __________________________________ 75

 

ARP Settings _________________________________________________________ 75

 

To Configure ARP Network Stack Settings __________________________________ 75

 

SMTP Settings ________________________________________________________ 76

 

To Configure ARP Network Stack Settings __________________________________ 76

 

Diagnostics ______________________________________________________________ 76

 

Hardware ____________________________________________________________ 76

 

To View Hardware Information ____________________________________________ 76

 

IP Sockets ___________________________________________________________ 77

 

To View the List of IP Sockets ____________________________________________ 77

 

Ping ________________________________________________________________ 77

 

To Ping a Remote Host _________________________________________________ 77

 

Traceroute ___________________________________________________________ 77

 

To Perform a Traceroute ________________________________________________ 78

 

Log _________________________________________________________________ 78

 

To Configure the Diagnostic Log Output ____________________________________ 78

 

Memory ______________________________________________________________ 79

 

To View Memory Usage _________________________________________________79

 

Processes ____________________________________________________________79

 

To View Process Information _____________________________________________79

Threads

 

_________________________________________________________________79

 

To View Thread Information ______________________________________________79

 

System Settings __________________________________________________________80

 

To Reboot or Restore Factory Defaults _____________________________________80

 

Query Port _______________________________________________________________80

 

To Configure Query Port ________________________________________________81

12:Advanced Settings 

82

Email Settings  ____________________________________________________________ 82

To View, Configure and Send Email ________________________________________ 82

Command Line Interface Settings _____________________________________________ 83

Basic CLI Settings  _____________________________________________________ 83

To View and Configure Basic CLI Settings ___________________________________ 83

Telnet Settings  ________________________________________________________ 84

To Configure Telnet Settings  _____________________________________________ 84

SSH Settings  _________________________________________________________ 84

To Configure SSH Settings  ______________________________________________ 85

XML Settings _____________________________________________________________ 85

XML: Export Configuration  _______________________________________________ 85

Summary of Contents for PremierWave EN









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands