9: Services Settings
PremierWave EN User Guide
60
Table 9-2
FTP Settings
To Configure FTP Settings
Using Web Manager
To configure FTP, click
FTP
in the menu.
Using the CLI
To enter the FTP command level:
enable -> config -> ftp
Using XML
Include in your file:
<configgroup name=”ftp server”>
Syslog Settings
The Syslog information shows the current configuration and statistics of the syslog. Here you can
configure the syslog host and the severity of the events to log.
Note:
The system log is always saved to local storage, but it is not retained through
reboots unless diagnostics logging to the filesystem is enabled. Saving the system log to a
server that supports remote logging services (see RFC 3164) allows the administrator to
save the complete system log history. The default port is 514.
Table 9-3 Syslog Settings
To View or Configure Syslog Settings:
Using Web Manager
To configure the Syslog, click
Syslog
in the menu.
FTP Settings
Description
State
Select to enable or disable the FTP server:
Enabled
(default)
Disabled
Syslog Settings
Description
State
Select to enable or disable the syslog:
Enabled
Disabled
(default)
Host
Enter the IP address of the remote server to which system logs are sent for storage.
Remote Port
Enter the number of the port on the remote server that supports logging services.
The default is 514.
Severity Log Level
Specify the minimum level of system message the PremierWave should log. This
setting applies to all syslog facilities. The drop-down list in the Web Manager is in
descending order of severity (e.g., Emergency is more severe than Alert.)
