manualshive.com logo in svg

Lantronix PremierWave EN, User Manual

Share
Download
Lantronix PremierWave EN User Manual Download Page 19

3: Using DeviceInstaller

PremierWave EN User Guide

19

Group

Configurable field. Enter a group to categorize the PremierWave. Double-
click the field, type in the value, and press Enter to complete. This group 
name is local to this PC and is not visible on other PCs or laptops using 
DeviceInstaller.

Comments

Configurable field. Enter comments for the PremierWave. Double-click the 
field, type in the value, and press Enter to complete. This description or 
comment is local to this PC and is not visible on other PCs or laptops using 
DeviceInstaller.

Device Family

Shows the PremierWave device family type as “PremierWave ”.

Short Name

Shows ”premierwave_en” by default

Long Name

Shows ”PremierWave EN” by default

Type

Shows the device type as “PremierWave””.

ID

Shows the PremierWave ID embedded within the unit.

Hardware Address

Shows the PremierWave hardware (MAC) address.

Firmware Version

Shows the firmware currently installed on the PremierWave.

Extended Firmware Version

Provides additional information on the firmware version.

Online Status

Shows the PremierWave status as Online, Offline, Unreachable (the 
PremierWave is on a different subnet), or Busy (the PremierWave is 
currently performing a task).

IP Address

Shows the PremierWave current IP address. To change the IP address, 
click the 

Assign IP 

button on the 

DeviceInstaller

 menu bar.

IP Address was Obtained

Appears “Dynamically” if the PremierWave automatically received an IP 
address (e.g., from DHCP). Appears “Statically” if the IP address was 
configured manually.

If the IP address was assigned dynamically, the following fields appear:

Obtain via DHCP

 with values of True or False.

Obtain via BOOTP

 with values of True or False.

Subnet Mask

Shows the subnet mask specifying the network segment on which the 
PremierWave resides. 

Gateway

Shows the IP address of the router of this network.

There is no default.

Number of Serial Ports

Shows the number of serial inputs on the PremierWave.

Supports Configurable Pins

Shows True, indicating configurable pins are available on the PremierWave.

Supports Email Triggers

Shows True, indicating email triggers are available on the

 PremierWave.

Telnet Supported

Indicates whether Telnet is enabled on this PremierWave.

Telnet Port

Shows the PremierWave port for Telnet sessions.

Web Enabled

Indicates whether Web Manager access is enabled on this PremierWave.

Web Port

Shows the PremierWave port for Web Manager configuration (if Web 
Enabled field is True).

Firmware Upgradable

Shows True, indicating the PremierWave firmware is upgradable as newer 
versions become available.

Current Settings 

Description

Summary of Contents for PremierWave EN









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands