Lantech LGS-2624C, User Manual, Page: 81 / 279

2-4.3 MSTI Poriorities
When you implement an Spanning Tree protocol on the switch that the
bridge instance. The CIST is the default instance which is always active.
For controls the bridge priority. Lower numeric values have better priority.
The bridge priority plus the MSTI instance number, concatenated with the 6-
byte MAC address of the switch forms a Bridege Identifier
The section describes it allows the user to inspect the current STP MSTI
bridge instance priority configurations, and possibly change them as well.
Web Interface
To configure the Spanning Tree MSTI Priorities parameters in the web
interface:
1. Click Configuration, Spanning Tree, MSTI Priorities
2. Scroll the Priority maximum is 240. Default is 128.
3. Click the save to save the setting
4. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Parameter description:
MSTI
The bridge instance. The CIST is the default instance, which is always
active.
Priority
Controls the bridge priority. Lower numeric values have better priority. The
bridge priority plus the MSTI instance number, concatenated with the 6-byte
MAC address of the switch forms a Bridge Identifier.