Lantech LGS-2624C, User Manual, Page: 239 / 279

3-7.2 Switch Status
This section shows the Port Security status. Port Security is a module with
no direct configuration. Configuration comes indirectly from other modules -
the user modules. When a user module has enabled port security on a port,
the port is set-up for software-based learning. In this mode, frames from
unknown MAC addresses are passed on to the port security module, which
in turn asks all user modules whether to allow this new MAC address to
forward or block it. For a MAC address to be set in the forwarding state, all
enabled user modules must unanimously agree on allowing the MAC
address to forward. If only one chooses to block it, it will be blocked until
that user module decides otherwise.
The status page is divided into two sections - one with a legend of user
modules and one with the actual port status.
Web Interface
To configure a Port Security Switch Status Configuration in the web
interface:
1. Checked
―Auto-reflash‖
.