Lantech LGS-2624C, User Manual, Page: 101 / 279

Web Interface
To configure the MLD Snooping Configuration in the web interface:
1. Click Configuration, MLD Snooping, Basic Configuration
2. Evoke to enable or disable the Global configuration parameters
Evoke the port to join Router port and Fast Leave.
3. Scroll to select the Throtting mode with unlimited or 1 to 10
4. Click the save to save the setting
5. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Parameter description:
Snooping Enabled
Enable the Global MLD Snooping.
Unregistered IPMC Flooding enabled
Enable unregistered IPMCv6 traffic flooding. Please note that disabling
unregistered IPMCv6 traffic flooding may lead to failure of Neighbor
Discovery.
Leave Proxy Enabled
Enable MLD Leave Proxy. This feature can be used to avoid forwarding
unnecessary leave messages to the router side.
Proxy Enabled
Enable MLD Proxy. This feature can be used to avoid forwarding
unnecessary join and leave messages to the router side.
Router Port
Specify which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or MLD
querier. If an aggregation member port is selected as a router port, the
whole aggregation will act as a router port.