Lantech LGS-2624C, User Manual, Page: 47 / 279

2. Configuration
This chapter describes all of the basic network configuration tasks
which includes the Ports, Layer 2 network protocol (e.g. VLANs, QoS,
IGMP, ACLs etc.) and any setting of the Switch.
2-1 Port
The section describes to configure the Port detail parameters of the switch.
Others you could using the Port configure to enable or disable the Port of
the switch. Monitor the ports content or status in the function.
2-1.1 Configuration
This chapter describes how to view the current port configuration and how to
configure ports to non-default settings, including
Linkup/Linkdown
Speed (Current and configured)
Flow Control (Current Rx, Current Tx and Configured)
Maximum Frame Size
Excessive Collision Mode
Power Control.
Web Interface
To configure an Current Port Configuration in the web interface:
1. Click Configuration, Port, then Configuration
2. Specify the Speed Configured, Flow Control , Maximum Frame sze ,
Excessive Collision mode and Power Control.
3. Click Save.