Lantech LGS-2624C, User Manual, Page: 143 / 279

VLAN Name
Indicates the name of VLAN. VLAN Name can only contain alphabets or
numbers. VLAN name should contain atleast one alphabet. VLAN name
can be edited for the existing VLAN entries or it can be added to the new
entries.
Port Members
A row of check boxes for each port is displayed for each VLAN ID. To
include a port in a VLAN, check the box. To remove or exclude the port from
the VLAN, make sure the box is unchecked. By default, no ports are
members, and all boxes are unchecked.
Adding a New VLAN
Click to add a new VLAN ID. An empty row is added to the table, and the
VLAN can be configured as needed. Legal values for a VLAN ID are 1
through 4095.
The VLAN is enabled on the selected stack switch unit when you click on
"Save". The VLAN is thereafter present on the other stack switch units, but
with no port members. The check box is greyed out when VLAN is
displayed on other stacked switches, but user can add member ports to it.
A VLAN without any port members on any stack unit will be deleted when
you click "Save".
The button can be used to undo the addition of new VLANs.