www.lanpro.com
Wireless - Equipment - LP-N24P - USER GUIDE
33
Q5:
Client cannot obtain IP when connected to soft AP of the wireless network adapter.
A5: Manually set an IP address at the same net segment as that of the AP and the gateway and DNS at the IP address of
AP.Thus, communication can be achieved.
Q6:
The SSID is not fully displayed on the wireless network list, what should I do?
A6: Keep the mouse on the displayed SSID for about 2 seconds, as the below picture shows,and you’ll see the full SSID on
the appearing box.
Q7: Under Windows 2000 system, IP address can not be obtained when it is switched to AP Mode.
A7: Under Windows 2000 system, you have to manually configure sharing and then switch to AP. And an IP address of
192.168.0.1 will be obtained.
If you still have any problem, please contact our customer service or visit our website:
www.lanpro.com
Q8:
Sometimes the UI can not be moved by the mouse and also can not be minisized, why?
A8: When you are performing some configurations or connections ,the UI only activates the currently operating window,other
windows are locked and can not be operated, but it will restore to normal when you close or finish the current configuration
and connection .
Q9: How to exit the UI?
A9: Right click the system tray icon and click “Exit” on the appearing dialog.
