www.lanpro.com
Wireless - Equipment - LP-N24P - USER GUIDE
25
Access Control is based on the wireless adapter’ MAC addresses to allow or reject a specified client’s access to this wireless
network.
When there is a client connected to this AP and has successfully obtained the IP address, then the client’s MAC address, AID
and Status can be seen on the list.
Access Policy:
Disable: To disable the filter function.
Allow All: To permit all hosts whose wireless MAC addresses are included in the list to access the wireless network, other
hosts whose wireless MAC addresses have not been added to the list will be prohibited by default.
Reject All: To prohibit all hosts whose wireless MAC addresses are included in the list from accessing the wireless network,
other hosts whose wireless MAC addresses have not been added to the list will be permitted by default.
MAC Address: To input the client’s wireless MAC address you want to filter in the physical address field.
Add: to add the entered wireless client MAC address to the list.
Delete: to delete an existing MAC address in the list.
Remove All: to delete all clients’ wireless MAC addresses in the list.
Add the MAC address of the client’s wireless network adapter to the list and select “All Allow” in the access policy drop-down
list, computers whose wireless MAC addresses are not included in the list will be rejected by default. Select “All reject”, and
only the host computers whose wireless MAC addresses are included in the list can not access the AP wireless network.
4.2.3 Access Control List
4.2.4 Associate List
