www.lanpro.com
Wireless - Equipment - LP-N24P - USER GUIDE
23
In this mode, the wireless adapter acts as an AP to transmit wireless signal and create a wireless network, while allowing
other wireless clients to access this network.
As shown in the diagram below: The PC in the left has already accessed to the Internet by using a wired network adapter,
meanwhile, you install a LanPro wireless adapter (take a USB wireless adapter as an example) and its UI on this computer,
and set the adapter to AP mode.
By using the wireless adapters to scan the AP’S SSID to connect, the computers in the right can also access to the Internet
after it is successfully connected.
In this mode, the client utility differs from that in station mode, and the main interface is as shown below.
When it is switched to AP mode, the wireless adapter will automatically set its IP address as 192.168.123.1, and other
clients that connected to this AP will automatically obtain the IP addresses of: 192.168.123.X(X is any integer from 2 to
254). The function buttons on the top (From L to R )are respectively Config AP, Advanced, Access Control List, Associate
List, About and MiniSize, while the left column displays Turn On/Off RF, Security /No security, and AP mode icon.
