www.lanprod.com
Wireless - Equipment - LP-N24P - USER GUIDE
14
The “Site Survey” screen displays currently scanned wireless signals and you can click one to connect the signal. Select
one and you may view the AP’s MAC address, wireless mode (B/G/N), authentication type, and encryption type, or WPS
authentication and signal strength.
Before you connect to a wireless network, please click the “Rescan” button to update the wireless network list and select
the one you wish to connect, then click the “Connect” icon.
For the networks that are not encrypted, you can directly click “Connect”. However, for the encrypted wireless networks, a
“Profile” dialog will pop up and you must select the corresponding authentication type and encryption type, and then click
the “Next” button to input the correct key. Please note that this type of connection will not create a profile, thus in the next
time connect to this network you still need to select it manually.
The detailed explanations about the authentication and encryption are as follows:
WEP: Supports 10/26-bit Hex characters and 5/13-bit ASCII.
WPA-PSK: Supports 8-63-bit ASCII and 8-64-bit Hex characters.
WPA2-PSK: Supports 8-63-bit ASCII and 8-64-bit Hex characters.
WPA-PSK/WPA2-PSK: Supports 8-63-bit ASCII and 8-64 -bit hex characters.
NOTE
:
The Hex characters consist of numbers 0~9 and letters a-f.
ASCII characters consist of any Arabic digitals/letters and characters.
4.1.1 Site Survey
