www.lanpro.com
Wireless - Equipment - LP-N24P - USER GUIDE
5
Insert the wireless adapter into the PCI slot of your
computer when it is turned off and then start it (Please
make sure the PCI adapter’s “gold fingers” are clean. If the
PCI adapter can’t be identified after being inserted into the
mainboard slot, or if the adapter can’t scan signals after the
driver being installed, please shut down your computer and
clean the adapter, and then re-install it).
When The “Found New Hardware Wizard” system
dialogue pops-up, we recommend that you select “Cancel”
and use the included Setup Wizard software CD for fast
installation.
Put the included software CD into the CD drive of
your computer, and the driver should run automatically , a
Welcome screen should pop up, just click the “RUN” button.
(Double click “LanPro.exe” in the software CD and manually
install when it doesn’t auto-run).
Select “I accept the terms of the license agreement”
and click “Next”.
Chapter 2 Installation Guide PCI network adapter
2
This chapter will guide you through the process of installing the network adapter software package, with the included
software CD. The package integrates driver and configuration software. Thus, when you are installing the driver, the
configuration software will be installed automatically as well.
The software installation steps and operating guide in this user guide are explained under Windows XP, Installation
steps for other operating systems are similar.
1
3
2
4
