LP-N24 Wireless Broadband Router. LPN24_UG_ENB01W
26
6.3 Advanced Settings
This section is to configure the advanced wireless setting of the Router, including the Radio Preamble,
802.11g/n Rate, Fragmentation Threshold, RTS Threshold, etc.
¾
BG protection Mode: Auto by default. It is for 11b/g wireless client to connect 11n wireless
network smoothly in a complicated wireless area.
¾
Basic Data Rates: For different requirement, you can select one of the suitable Basic Data
Rates. Here, default value is All(1-2-5.5-11-12-24 Mbps…). It is recommended not to modify this
value.
¾
Beacon Interval: Set the beacon interval of wireless radio. Default value is 100. It is
recommended not to modify this value.
¾
Fragment Threshold: The fragmentation threshold defines the maximum transmission packet
size in bytes. The packet will be fragmented if the arrival is bigger than the threshold setting. The
default size is 2346 bytes. It is recommended not to modify this value.
¾
RTS Threshold: RTS stands for “Request to Send”. This parameter controls what size data
packet the frequency protocol issues to RTS packet. The default value of the attribute is 2347. It
is recommended not to modify this value in SOHO environment.
¾
TX Power: Set the output power of wireless radio. The default value is 100.
¾
WMM Capable: It will enhance the data transfer performance of multimedia data when they’re
being transferred over wireless network. It is recommended to enable this option.
¾
APSD Capable: It is used for auto power-saved service. The default is disabled.
