LP-N24 Wireless Broadband Router. LPN24_UG_ENB01W
39
Chapter 10 Security Settings
10.1 Client Filter Settings
To benefit your further management to the computers in the LAN, you can control some ports access
to Internet by data packet filter function.
¾
Client Filter: Check to enable client filter.
¾
Access Policy: Select one number from the drop-down menu.
¾
Enable: Check to enable the access policy.
¾
Clear the Policy: Click “Clear” button to clear all settings for the policy.
¾
Filter Mode: Click one radio button to enable or disable to access the Internet.
¾
Policy Name: Enter a name for the access policy selected.
¾
IP Start/End: Enter the starting/ending IP address.
¾
Port No: Enter the port range based over the protocol for access policy.
¾
Protocol: Select one protocol (TCP/UDP/Both) from the drop-down menu.
¾
Times: Select the time range of client filter.
¾
Date: Select the day(s) to run the access policy.
For example:
If you don’t want the designated computer at IP address of 192.168.0.10 to visit website from 8:00
to18:00 everyday without restriction to other computers, you need to set it as above.
