LP-N24 Wireless Broadband Router. LPN24_UG_ENB01W
37
Chapter 9 Traffic Control
9.1 Traffic Control
Traffic control is used to limit communication speed in the LAN and WAN. Up to 20 entries can be
supported with the capability for at most 254 PCs' speed control, including for IP address range
configuration.
¾
Enable Traffic Control: To enable or disable the internal IP bandwidth control. The default is
disabled.
¾
Interface: To limit the uploading and downloading bandwidth in WAN port.
¾
Service: To select the controlled service type, such as HTTP service.
¾
IP Starting Address: The first IP address for traffic control.
¾
IP Ending Address: The last IP address for traffic control.
¾
Uploading/Downloading: To specify the traffic heading way for the selected IP addresses:
uploading or downloading.
¾
Bandwidth: To specify the uploading/downloading Min. /Max. Traffic speed (KB/s), which can
not exceed the WAN speed.
¾
Apply: To enable the current editing rule. If not, the rule will be disabled.
¾
Add: After edit the rule, click the “add to list” button to add the current rule to rule list.
