LP-N24 Wireless Broadband Router. LPN24_UG_ENB01W
28
it is not used. Usually the AP-security has been enabled, here will displayed “not used”.
¾
WPS SSID: Show the main SSID set by WPS.
¾
WPS Auth. Mode: The authorization mode deployed by WPS, generally WPA/WPA2-personal
mode.
¾
WPS Encrypt Type: The encryption type used by WPS, generally AES/TKIP.
¾
WPS key: The effective key generated by AP automatically.
¾
AP PIN(KEY): The PIN code used by default.
¾
Reset OOB: When this button is pressed, the WPS client will be idle state, and WPS indicator will
be turned off. AP will not respond the WPS client’s requests and the set the security mode as WPA
mode.
6.5 WDS Settings
WDS (Wireless Distribution System) is used to expand wireless coverage area. This Router provides
three modes: Lazy, Bridge and Repeater.
Lazy: In this mode, the connected device can be Bridge mode or Repeater mode and enter the
Router’s BSSID to establish the connection.
Bridge: You can wirelessly connect two or more wired networks via this mode. In this mode, you
need to add the Wireless MAC address of the connecting device into the Router's AP MAC address
table or select one from the scanning table.
Repeater Mode:In this mode, add the opposing MAC address into each own AP MAC address table
