Lanner NCA-4035 User Manual Download Page 59

Page: 59 / 109

NCA-4035 User Manual

Platform

Hierarchy

Enabled

Disabled

Enables or disables Platform Hierarchy.

Storage Hierarchy

Enabled

Disabled

Enables or disables Storage Hierarchy.

Endorsement

Hierarchy

Enabled

Disabled

Enables or disables Endorsement Hierarchy.

TPM2.0 UEFI Spec

Version

TCG_1_2

TCG_2

Select the TCG2 Spec Version,

TCG_1_2

: Supports the Compatible mode for Win8/Win10

TCG_2

: Supports new TCG2 protocol and event format for

Win10 or later.

Physical Presence

Spec Version

1.2

1.3

Select to tell OS to support PPI Spec Version 1.2 or 1.3.

NOTE

: Some HCK tests might not support 1.3.

TPM 20

Interface Type

TIS

Select

TPM 20 Device

for the Communication Interface.

Device Select

TPM 1.2
TPM 2.0

Auto

TPM 1.2

will restrict support to TPM 1.2 devices; while

TPM

2.0

will restrict support to TPM 2.0 devices;

Auto

will support

both with the default set to TPM 2.0 devices. If not found, TPM
1.2 devices will be enumerated.

Summary of Contents for NCA-4035














































































































Search results

Summary of Contents for NCA-4035

Reviews:

Brands by name

Popular brands

Lanner NCA-4035, User Manual

Search results

Summary of Contents for NCA-4035

Reviews:

Brands by name

Popular brands