Lanner NCA-4035 User Manual Download Page 57

Page: 57 / 109

NCA-4035 User Manual

Feature

Options

Description

Security Device

Support

Enabled

Disabled

Enables or disables BIOS support for security device. By disabling
this function, OS will not show Security Device. TCG EFI protocol
and INT1A interface will not be available.

TPM State

Enabled

Disabled

Enables or disables Security Device.

NOTE

: Your computer will reboot during restart in order to

change State of the Device.

Pending operation

None

TPM Clear

Schedules an Operation for the Security Device.

NOTE

: Your

computer will reboot during restart in order to change State of
Security Device.

Device Select

TPM 1.2
TPM 2.0

Auto

TPM 1.2

will restrict support to TPM 1.2 devices; while

TPM 2.0

will restrict support to TPM 2.0 devices;

Auto

will support both

with the default set to TPM 2.0 devices.If not found, TPM 1.2
devices will be enumerated.

Summary of Contents for NCA-4035














































































































Search results

Summary of Contents for NCA-4035

Reviews:

Brands by name

Popular brands

Lanner NCA-4035, User Manual

Search results

Summary of Contents for NCA-4035

Reviews:

Brands by name

Popular brands