Lanner NCA-4035 User Manual Download Page 2 | Manualshive

Page: 2 / 109

background image

NCA-4035 User Manual

2

This manual describes the overview of the various functionalities of this product, and the information you need
to get it ready for operation. It is intended for those who are:
-

responsible for installing, administering and troubleshooting this system or Information Technology
professionals.

-

assumed to be qualified in the servicing of computer equipment, such as professional system integrators,
or service personnel and technicians.

The latest version of this document can be found on

Lanner’s official website,

available either through the

product page or through the

Lanner Download Center

page with a login account and password.

The icons are used in the manual to serve as an indication of interest topics or important messages.

Icon

Usage

This mark indicates that there is something you should pay special
attention to while using the product.

This mark indicates that there is a caution or warning and it is
something that could damage your property or product.

To obtain additional documentation resources and software updates for your system, please visit the

Download Center

. As certain categories of documents are only available to users who are logged in, please be

registered for a Lanner Account at

http://www.lannerinc.com/

to access published documents and

downloadable resources.

In addition to contacting your distributor or sales representative, you could submit a request at our

Technical Support

and

fill in a support ticket to our technical support department.

Your feedback is valuable to us, as it will help us continue to provide you with more accurate and relevant
documentation. To provide any feedback, comments or to report an error, please email

[email protected]

Thank you for your time.

This document is copyrighted © 2022 by Lanner Electronics Inc. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products described in this manual at any time
without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by
any means without the prior written permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility
for its use, nor for any infringements upon the rights of third parties that may result from such use.

Note

or

Information

Warning

or

Important

«
1
2
3
4
...
»

Summary of Contents for NCA-4035














































































































Reviews:

No comments

Related manuals for NCA-4035

Professional Series

Brand: PACOM Pages: 15

Brand: Paradyne Pages: 16

INTERNET PRIVACY PROTECTION

Brand: AlphaShield Pages: 49

Brand: BSS Audio Pages: 20

Brand: Reeven Pages: 2

Optane M Series

Brand: Intel Pages: 59

Brand: DAD Pages: 32

Brand: Cypress Semiconductor Pages: 11

RS-232/422/485 Serial Card CE 3PXCC4A

Brand: B&B Electronics Pages: 47

Aquaduct 360 XT

Brand: Aqua Computer Pages: 28

ELC-LTTR240-TBP

Brand: ENERMAX Pages: 16

Brand: Billion Pages: 120

Brand: Freescale Semiconductor Pages: 8

NVRx-7300 series

Brand: Swann Pages: 9

Brand: VCS Pages: 118

Brand: Observint Pages: 117

Brand: Zoom Pages: 31

FireWire 800 ExpressCard 34

Brand: LaCie Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands