Lanner NCA-4035 User Manual Download Page 103 | Manualshive

Page: 103 / 109

background image

NCA-4035 User Manual

103

Failure when booting up BIOS is not uncommon and can occur most often during a power failure, a mishandled
BIOS update, a malware attack resulting in data corruption. When it happens, recovering procedures consume
considerable time and effort. Lanner understands this pain and have empowered our products with the Dual
BIOS feature.

Dual  BIOS  features  two  physical  BIOS  ROMs  soldered  onto  the  motherboard,  carrying  two  separate  BIOS
images.  If  the  Primary  BIOS  (default)  is  not  functioning  correctly  and  fails  to  respond  within  seconds  (~25
seconds to 2 minutes, depend upon appliance), the system will invoke a bootup from the Secondary BIOS,
automatically restarting the system and launch the operating system.

To provide increased flexibility and usage protection, Lanner has released the 2nd Gen Dual BIOS function on
Lanner appliances. With 2nd Gen Dual BIOS, both the primary BIOS and secondary BIOS can be updated and
flashed using the BIOS Tool to run different versions of BIOS ROMS independently for maximum compatibility.
This additionally allow users to switch BIOS ROMS for booting up, toggling between primary BIOS and
secondary BIOS.

●

Flexible recovery timer control

Users can designate the amount of time before recovery BIOS launch. The amount of time is no longer fixed
to 7 minutes.

●

Flexible Dual BIOS ROMs control.

Users can flash both the Primary BIOS and Secondary BIOS, thus run different versions of BIOS ROMS
independently for maximum compatibility.

●

Flexible Dual BIOS ROMs switch

«
...
101
102
103
104
105
...
»

Summary of Contents for NCA-4035














































































































Reviews:

No comments

Related manuals for NCA-4035

Brand: GE Pages: 146

OfficeConnect 1600

Brand: 3Com Pages: 8

Brand: 3Com Pages: 8

Brand: Quectel Pages: 23

Brand: Bridgeworks Pages: 18

Brand: Toto Link Pages: 55

Brand: SIIG Pages: 20

Brand: Logicube Pages: 56

Brand: Planet Pages: 54

Brand: YASKAWA Pages: 87

Brand: Atlantis Land Pages: 2

Brand: Sennheiser Pages: 22

Brand: Vertilon Pages: 21

Brand: XMOS Pages: 8

Brand: Rosewill Pages: 5

Brand: Paradyne Pages: 216

Matrix 6H303-48

Brand: Enterasys Pages: 90

9500S-8 - Escalade RAID Controller

Brand: 3Ware Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands