HTCA-E400 User Manual
32
HMB-E100 and HMB-E200 supports externally accessible
2.5”
disk drive bays, with HMB-E100 supporting
two 2.5” disk drives and HMB
-
E200 supporting four 2.5” disk drives
. Please follow the steps for installation.
1. Select a drive bay for installation and
press down on the lock of the drive bay.
2. The lever handle will pop open.
3. Pull the drive bay out using the lever
handle, and install a
2.5”
SSD disk drive.
Keep in mind that the contacts should be
facing outwards (bottom section of the
drive bay), and will go towards the inside
of the system.
4. Secure the drive with four (4) screws on
the back side.
5. Then gently slide the drive back into its
slot and push lever until close.
Contacts
