manualshive.com logo in svg

Lanier 8025, Fax Manual

Download the Lanier 8025 Fax Manual for free from our website. This comprehensive manual provides step-by-step instructions and troubleshooting guides for setting up and using the Lanier 8025 Fax machine. Get the most out of your device with the help of this user-friendly manual, available for immediate download.

Share
Download
background image

vii

9. Administrator Setting

Administrator Tools List ................................................................................... 155
Using Administrator Settings ........................................................................... 157

Programming, Changing, and Deleting Standard Messages ................................. 157
Storing, Changing, and Deleting an Auto Document ............................................. 158

Deleting an Auto Document................................................................................. 159

Programming, Changing and Deleting a Scan Size............................................... 160

Deleting a scan size ............................................................................................ 161

Printing Journal ...................................................................................................... 162
Counters................................................................................................................. 162
Forwarding ............................................................................................................. 162

Programming an End Receiver ........................................................................... 163
Quitting the forwarding function........................................................................... 164
Forwarding Mark.................................................................................................. 165

Memory Lock.......................................................................................................... 165
ECM (Error Correction Mode) ................................................................................ 166
User Parameters .................................................................................................... 167

Changing the User Parameters ........................................................................... 171
Printing the User Parameter List ......................................................................... 172

Special Senders to Treat Differently ...................................................................... 172

Authorized Reception .......................................................................................... 173
Forwarding........................................................................................................... 174
Reception File Print Quantity............................................................................... 174
Print 2 Sided ........................................................................................................ 174
Memory Lock ....................................................................................................... 175
Paper Tray........................................................................................................... 175
Programming/Changing Special Senders ........................................................... 175
Programming Initial Set Up of a Special Sender ................................................. 178
Deleting a Special Sender ................................................................................... 180
Printing the Special Sender List .......................................................................... 181

Box Settings ........................................................................................................... 181

Programming/changing Personal Boxes ............................................................. 182
Deleting Personal Boxes ..................................................................................... 184
Programming/changing Information Boxes ......................................................... 185
Deleting Information Boxes ................................................................................. 187
Programming/changing Transfer Boxes .............................................................. 188
Deleting Transfer Boxes ...................................................................................... 190
Printing the Box List............................................................................................. 191

Transfer Report ...................................................................................................... 192
Programming a Confidential ID .............................................................................. 192
Programming a Polling ID ...................................................................................... 193
Programming a Memory Lock ID ........................................................................... 194
Selecting Dial/Push Phone..................................................................................... 194
Storing or Printing Received Documents ............................................................... 195

Reception Report e-mail...................................................................................... 196

Setting a User for Viewing Received and Stored Documents................................ 197
Menu Protection Settings ....................................................................................... 198
Folder Transfer Result Report................................................................................ 198

Folder Transfer Result Report by e-mail ............................................................. 199

RussianC4-EN_Combine-F_FM.book  Page vii  Tuesday, April 5, 2005  8:22 PM

Summary of Contents for 8025













































































































































































































































Reviews:

No comments

Related manuals for 8025

Canon ImageCLASS MF4570dw Basic Operation Manual preview
ImageCLASS MF4570dw
Brand: Canon Pages: 164
Canon imagePRESS C800 Series Service Manual preview
imagePRESS C800 Series
Brand: Canon Pages: 132
Canon ImageCLASS MF5730 Technical Information preview
ImageCLASS MF5730
Brand: Canon Pages: 2
Canon imagePROGRAF iPF8400 Basic Manual preview
imagePROGRAF iPF8400
Brand: Canon Pages: 157
Canon JX210P On-Screen Manual preview
JX210P
Brand: Canon Pages: 91
DataCard CR500 Quick Install Manual preview
CR500
Brand: DataCard Pages: 17
DataCard CR500 User Reference Manual preview
CR500
Brand: DataCard Pages: 24
Samsung SCX-4300 - SCX 4300 B/W Laser Installation Instructions preview
SCX-4300 - SCX 4300 B/W Laser
Brand: Samsung Pages: 4
Samsung ML-2240 - 23 Ppm Mono Laser Printer Manual preview
ML-2240 - 23 Ppm Mono Laser Printer
Brand: Samsung Pages: 16
Samsung ML 2510 - B/W Laser Printer User Manual preview
ML 2510 - B/W Laser Printer
Brand: Samsung Pages: 170
Samsung CLX-3185FN Manual Del Usuario preview
CLX-3185FN
Brand: Samsung Pages: 165
Xerox 770 System Administration Manual preview
770
Brand: Xerox Pages: 114
Samsung SPP 2020 - Photo Printer - 20 Sheets Manual Del Usuario preview
SPP 2020 - Photo Printer - 20 Sheets
Brand: Samsung Pages: 81
Samsung ML-6000 Bedienungsanleitung preview
ML-6000
Brand: Samsung Pages: 98
Samsung ML-4050N Compatibility Manual preview
ML-4050N
Brand: Samsung Pages: 6
Samsung ML-3750ND User Manual preview
ML-3750ND
Brand: Samsung Pages: 203
Samsung ML-3312ND Manual Del Usuario preview
ML-3312ND
Brand: Samsung Pages: 264
Samsung ML-2165W/XAA Manual Del Usuario preview
ML-2165W/XAA
Brand: Samsung Pages: 228

Brands by name

Popular brands

Load more brands