Lanier 8025, Fax Manual

Page: 67 / 236

On Hook Dial
57
4
On Hook Dial
The On Hook Dial function allows
you to dial while listening to the tone
from the internal speaker. You can
send a fax checking the connection.
Limitation
❒
This function is not available for
the optional extra G3 interface
unit, Internet Fax and IP-Fax.
Note
❒
This function is unavailable in some
countries.
❒
If an Immediate TX Result Report
(Immediate Transmission) is print-
ed, On Hook Dial transmission re-
sults are not mentioned on the report.
A
Place the original, and then select
the scan settings you require.
Reference
p.15 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.34 “Scan Settings”, Facsimile
Reference <Basic Features>
B
Press the
{
On Hook Dial
}
key.
You will hear a low tone from the
internal speaker.
Note
❒
If you want to cancel this oper-
ation, press the
{
On Hook Dial
}
key again.
C
Dial.
The machine immediately dials the
destination.
Note
❒
You can adjust the volume of
the on-hook sound by pressing
[ Higher ]
or
[ Lower ]
in the upper
right-hand corner of the display.
The volume can also be prepro-
grammed in “Gen. Settings/ Ad-
just”. See p.91 “Adjusting the
Volume”,
Facsimile Reference
<Basic Features> and p.145
“ G e n e r a l S e t t i n g s / A d j u s t -
ment”.
❒
If you make a mistake, press the
{
On Hook Dial
}
or
{
Clear Modes
}
key, and then return to step
B
.
D
When the line is connected and you
hear a high-pitched tone, press
the
{
Start
}
key.
The transmission starts.
Note
❒
After transmission, the machine
returns to standby mode.
❒
If you want to cancel a transmis-
sion, press the
{
Clear/Stop
}
key,
and then remove the originals.
ZLBS070N
RussianC4-EN_Combine-F_FM.book Page 57 Tuesday, April 5, 2005 8:22 PM