background image

Sending Fax Documents from Computers

109

6

Installing individual applications

Preparation

Before installing the above appli-
cations, install SmartDeviceMonitor
for Client. See “Software and Utilities
Included on the CD-ROM”, 

Printer

Reference

.

Use the following procedure to install
LAN-Fax Driver, Address Book, and
LAN-Fax Cover Sheet Editor at one
time.

A

Quit all applications currently run-
ning.

B

Insert the CD-ROM included with
this machine into the CD-ROM
drive of your computer.

The installer launches automatical-
ly, and the language selection win-
dow appears.

Note

Depending on your operating
system settings, the installer
may not launch automatically.
If it does not, double-click “Set-
up.exe” in the CD-ROM root di-
rectory to launch the installer.

C

Select the interface language of
the software, and then click 

[

OK

]

.

D

Click 

[

LAN-Fax Driver

]

.

The software license agreement
window appears.

E

Read all of the terms and, if you
agree, select 

[

I accept the agree-

ment.

]

, and then click 

[

Next

]

.

Note

If you select 

[

I don't accept the agree-

ment.

]

, you cannot complete the in-

stallation.

F

Select the 

[

LAN-Fax Driver

]

 check box,

and then click 

[

Next

]

.

G

Confirm that the 

[

Printer Name:<LAN-

Fax M7>

]

 check box is selected, and

then click 

[

Continue

]

.

Note

Select the desired port.

H

Click 

[

Finish

]

.

The installation completion dialog
box appears.

I

Click 

[

Finish

]

.

J

Click 

[

Exit

]

.

Applications Stored on the 
CD-ROM

This section provides information
about LAN-Fax Driver, Address Book,
and LAN-Fax Cover Sheet Editor. 

LAN-Fax Driver

This driver allows you to use LAN-Fax
functions.

Location of the file

The following folders are on the
CD-ROM:
• LAN-Fax Driver for Windows

95/98/Me
\DRIVERS\LAN-FAX\
WIN9X_ME

• LAN-Fax Driver for Windows

NT 4.0
\DRIVERS\LAN-FAX\NT4

• LAN-Fax Driver for Windows

2000/XP
\DRIVERS\LAN-FAX\
WIN2K_XP

RussianC4-EN_Combine-F_FM.book  Page 109  Tuesday, April 5, 2005  8:22 PM

Summary of Contents for 8025













































































































































































































































Reviews: