Lanier 5484 Operator'S Manual Download Page 70

Page: 70 / 368

Copying

Press the

[Store]

key.

Press the program number you want to store.

Note

❒

Program numbers with

already have settings in them.

⇒

P.57

“Chang-

ing Stored Program”

Enter the program name with the letter keys on the display panel. Then
press the

[#]

key.

Note

❒

You can register up to 18 characters.

❒

To change the name entered, press the

[Clear]

key and enter new letter.

Press the

[OK]

key.

When the settings are successfully stored, the

indicator appears.

Summary of Contents for 5484
















































































































































































































































































































































































Search results

Summary of Contents for 5484

Reviews:

Related manuals for 5484

Brands by name

Popular brands

Lanier 5484, Operator'S Manual

Search results

Summary of Contents for 5484

Reviews:

Related manuals for 5484

Brands by name

Popular brands