Lanier 5484, Operator'S Manual

Page: 21 / 368

7
Control Panel
1.
Status indicator
2. {
Screen Contrast
}
knob
Adjusts the brightness of the display pan-
el.
3. {
Language Selection
}
key
Press to change the display language.
4.
{
Interrupt
}
key
Press to make interrupt copies during a
copy run. See
⇒
P.68 “Interrupt Copy” .
5. {
Energy Saver
}
key
Press to switch to and from Energy Saver
mode. See
⇒
P.68 “Energy Saver Mode” .
6. {
Clear Modes
}
key
Press to clear any previously entered
copy job settings.
7. {
Program
}
key
Press to register or recall a program. See
⇒
P.55 “Programs” .
8. {
Stop
}
key
Press to stop a copy job in progress.
9. {
Start
}
key
Press to start copying. If pressed just after
the machine is turned on, the job will
start after the warm-up period. See
⇒
P.70
“Auto Start”
.
10. {
Sample Copy
}
key
Use this key to make a single sample
copy set before starting a long copy run.
Color Status
Off Ready to make
copies
Flashing green Scanning originals
Lit green Copying (You can
scan originals.)
Flashing red Toner has nearly
run out