Lanier 5484, Operator'S Manual

Page: 345 / 368

Key Operator Tools
331
6
Key Operator Tools
If the key operator code has been registered beforehand, you cannot access the
Key Operator Tools unless you enter the key operator code (up to 8 digits).
Menu Description
Check/Reset/Print Copy Counter
You can check or print the number of copies made under each user code.
You can also reset each user code counter to 0.
If more than 20 user codes are registered, you can view all the counters using the
[Pre-
vious] or [Next] key.
Print Counter List You can print the number of copies under each user code.
To start printing, press the [Print Counter List] key. To stop
printing, touch the
[Cancel]
key.
Reset Counters You can reset each user code counter to 0.
Reset All Counters You can reset all counters to 0.
Program/Change/Delete User Code
You can register, change, or delete user codes (8 digits or less).
Note
❒
Up to 500 user codes can be registered.
❒
Even if you have changed a user code, the counter value will not be cleared.
❒
When the user code is deleted, the counter value will be automatically deleted.
Program You can register user codes.
A
Press the [Program] key.
B
Enter the User Code using the number keys.
C
Press the
[OK]
key.
Change You can change user codes.
A
Press the [Change] key.
B
Press the User Code you want to change.
C
Enter new User Code using the number keys.
D
Press the [OK] key.
Note
❒
The number of copies made under the old code is added
to that made under the new user code.