Lanier 5415MFD, Operator'S Manual

Page: 229 / 258

Safety Information
Specifications 13 - 3
WARNING:
This device must be used with shielded interface cables. The use of non-shielded cable is likely
to result in interference with radio communications and is prohibited under the EC Directive
rules.
The copier has been approved in accordance with Council Decision 98/482/EC for pan-
European single terminal connection to the pubic switched telephone network (PSTN).
However, due to differences between the individual PSTNs provided in different countries,
the approval does not, of itself, give an unconditional assurance of successful operation on
every PSTN network termination point.
In the event of problems, you should contact your equipment supplier in the first instance.
Note:
The manufacturer should ensure that the vendor and user of equipment is clearly informed of
the above information by means of packaging and/or user manuals or other forms of user
instructions.
This product is approved for DTMF dialing only. When directly connected to the public
switched telephone network (PSTN mode) pulse dialing can
not be used.
(Pulse dialing may only be used when this product is connected to a PABX.)
If an additional telephone is connected to the FAX unit, the LF (Loading Factor) should not
be greater than 30.