background image

Safety Information

13 - 4

Specifications

FCC PART 68 – TELECOMUNICATION DEVICES

This equipment complies with Part 68 of the FCC rules. On the rear panel of this equipment is 

a label that contains, among other information, the FCC registration number and Ringer 

Equivalence Number (REN) for this equipment. If requested, provide this information to your 

telephone company.

This equipment uses THE FOLLOWING USOC JACKS: RJHC.

The REN is useful to determine the quantity of devices you may connect to your telephone line 

and still have all of those devices ring when your number is called. In most, but not all areas, 

the sum of the RENs of all devices should not exceed five (5.0). To be certain of the number of 

devices you may connect to your line, as determined by the REN, you should call your local 

telephone company to determine the maximum REN for your calling area. REN is 0.3B

If your telephone equipment causes harm to the telephone network, the Telephone Company 

may discontinue your service temporarily. If possible, they will notify you in advance. But if 

advance notice isn’t practical, you will be notified as soon as possible. You will be advised of 

your right to file a complaint to file a complaint with the FCC.

Your telephone company may make changes to its facilities, equipment, operations, or 

procedures that could affect the proper operation of your equipment. If they do, you will be 

given advance notice so as to give you an opportunity to maintain uninterrupted service.

The telephone company may ask you to disconnect this equipment from the network until the 

problem has been corrected or you are sure that the equipment is not malfunctioning.

This equipment may not be used on coin service provided by the telephone company. 

Connection to party lines is subject to state tariffs. (Contact your public utility commission or 

corporation commission for information.)

CUSTOMER INFORMATION FOR PRIVATELY OWNED COIN PHONES

To comply with state tariffs, the telephone company must be given notification prior to 

connection.

In some states, prior approval of connection must be obtained from the state Public Utility 

Commission, Public Service Commission or state Corporation Commission.

WARNING FOR THE SETTING OF HEADER AND FOOTER

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a 

computer or other electronic device to send any message via a telephone fax machine unless 

such message clearly contains in a margin at the top or bottom of each transmitted page or on 

the first page of the transmission, the date and time it is sent and an identification of the 

business or other entity, or other individual sending the message and the telephone number of 

the sending machine or such business, other entity, or individual.

In order to program this information into your fax machine, you should complete the following 

steps.

Summary of Contents for 5415MFD



































































































































































































































































Reviews: